| Amplifiers |
| Antennas |
| Cables & Connectors |
| Conductive Materials |
| Ferrites |
| Filters |
| Misc. |
| Shielded Rooms & Enclosures |
| Shielding |
| Surge & Transients |
| Test Instrumentation |
| Testing |
Interference Technology Forums: A New Opportunity In the weeks since the new, revamped Interference Technology website was launched, we’ve received many compliments on the fresh clean new look.
Connectors Conundrum Shielded connectors and the effective use of connectors can be vital to achieving EMC.
Performing GR-1089-Core Lightning and Power Cross Test A review of the test methodologies and equipment required to perform GR-1089-CORE lightning and power cross testing.
Integrated Inductive Component Reduces Radiated Emissions in Power Applications The geometry of magnetic components can affect the incidence of unwanted low frequency radiation in the magnetic field.
Solving Emission Problems with EMI/RFI-suppressing Connectors “Swap-in” connectors can be key in meeting tough emission specifications such as EN 55024 and CISPR 24. »
Improving the Way We Measure Insertion Loss A proposed set of new test methods may provide more accurate attenuation data.
The IEC Advisory Committee on EMC (ACEC) Since its formation, ACEC has developed a unique structure for EMC publications that is used to this day in the IEC and in other regional standardization organizations.
Antenna Fundamentals Publication: Directory & Design Guide 2007
Abstract: A proper understanding of antennas requires familiarity with electromagnetics, circuit theory, electronics, and signal processing.
Software Simulation Boosts the Efficacy of PCB Design Adding an effective package to the design cycle can pinpoint areas critical to EMC compliance.
The Importance and Methods of Full Wave Simulation Validation Regardless of the accuracy of the modeling tool, each modeling exercise requires some level of validation before simulation results can be trusted.
Capacitor Termination Can Enhance Reliability Using a polymer termination for multilayer capacitors forestalls damage during PCB assembly.
New EMC Directive: 2004/1081 EC Manufacturers should familiarize themselves with the additional requirements and the alterations found in the new EMC directive.
Voltage Sag Testing for Commercial and Industrial Equipment The ultimate goal for any product manufacturer is to make its product immune to voltage sags.
Optimal Techniques for Minimizing IR-Drop and Supply Bounce Any multi-supply pinned microcontroller can be improved simply by altering the pin allocation.
On-site EMF Testing of an Emergency Network Communications Vehicle Thorough testing requires taking measurements both inside and outside the vehicle.
Displaying results 21 to 36 out of 36
channel guide
MARKETS
Aerospace
Automotive
Military
NEBS/Telecom
Amplifiers
Antennas
Connectors
Ferrites
Filters
Shielding
Testing
Products and Services Buyers Guide
EMC Test Labs Buyers Guide